Products & Services » Rust Proofing » Salt & Offshore Class 6

Coastal, Salt Mining & Offshore Rustproofing - Extreme Conditions

(Order Code:- BS6)

Beam Salt and Offshore Class 6 is our most thorough Bituminous, wax and dry film based rust treatment currently available and is designed to combat corrosion in extreme conditions. This level of rust protection is suited to vehicles and mobile plant deployed in salt and fertiliser works, coastal and offshore facilities.

Below is a guide to a typical Application. ( Note: This may vary depending upon vehicle type )

Application Guide:

Beam ML702 is a heavy duty dry film corrosion preventative compound which is spray applied to:

  • Inside Door cavities, Pillars, Rocker Panels and Box Sections.
  • Behind headlight and grille areas
  • Inside Bonnet & Boot lid stiffeners and tailgate areas.
  • Brake, Fuel, Hydraulic and Transmission Lines and fittings.
  • Inside Chassis rails
  • Inside Plenum Chamber.

Beam UB302B is a bituminous black underbody rust preventative is spray applied to:
  • The complete chassis and under body.
  • Lower cavities of the front and rear wheel guards.
  • Wheel arches, fuel, air and hydraulic tanks
  • Engine Sump, Transfer casing, Drive Line,Axles and differentials.
  • Suspension components, brake housings and steering arms.
  • Fixing points for tow bars, bull bars and side steps.
  • Internal Foot wells and floor.
 
Ultratect “DURON" is a 2K Teflon/Polyurethane Chemical & Corrosion Resistant dry film Clearcoat which is spray applied to:
  • Underside of Bonnet
  • Around front and rear window seals.
  • Painted areas of the engine compartment.
  • Alloy engine components.
  • Wheel Rims.
Metal Fix 1000 is a high temperature rust resistant paint which is spray applied to:
  • Entire Exhaust System
Denso Tape which is a corrosion resistant, fire retardant wax tape which is hand wrapped around the following components.
  • Steering tie rod ends.
  • Park Brake Cable and adjusters.
  • Front suspension torsion bar adjusting bolts.
  • Front radius rod threads.
  • Top threads of shock absorbers.
  • Rear brake load sensor system - valve and pivot point.
  • Engine fuel line tubing.
  • Power Steering tubing and fittings.
  • Brake and Clutch adjusters, line fittings and pivots.
  • Brake and Transmission lines and fittings.
  • Engine Oil Fittings.
  • All accessible hydraulic, fuel and electrical fittings, connectors and joins.
  • Air conditioiner pipes and fittings at condenser, compressor and dryer.

 
Options and related Treaments
  • CATIII Electronic Anti-Corrosion System - For a complete anti-corrosion solution you should consider the advantages of installing a CAT System. Electronic Anti-Rust Systems can protect all those areas of your vehicle that cannot or shouldnt be sprayed with chemical rustproofing - Please enquire.  
  • Underbody or Upperbody only treaments may be more suitable in some situations - please enquire. 
  • Ultratect “BEAMASTIC" is a High Build 2K epoxy mastic for coating chassis and under body areas. Beam highly recommends this coating as an upgrade replacement for the traditional Bituminous Based under body coating used in this specification. See Ultratect Surface Mining Class 9
  • Some or all of the exterior painted surfaces can be coated with our  Ultratect "DURON" 2K Teflon/Polyurethane Clearcoat to provide long-term protection against attack by water, acids and most chemicals. This product is ideal for Roofs, Gutters, doors, Bonnets, Side steps, Bull bars in fact its applications are almost unlimited. Ultratect "DURON" is UV stable (will not go yellow) and will not significantly change the appearance of the substrate. It can also be removed or repaired easily at any time if required.
  • Rhino Lining - Polyurethane spray-on tray and surface coating - Ideal for inside load areas and to encapsulate and permanently protect high impact areas such as bull bars, side steps, internal floor pans, mudguards, wheel arches, chassis rails and most underbody components. Rhino Lining can be sprayed to any thicknessis, is slip resistant, prevents Rust and Corrosion, is Waterproof and chemical resistant and will not be damaged by flying debris or rocks - please enquire about how our Rhino Lining product can protect your vehicle. 

Application Time : (4 DAYS)

(Note: The above specification was last revised 7/7/2012 and should be used as a guide only. Some procedures may be altered or omitted for specific vehicle types or due to special customer requests. Beam reserves the right to alter this specification at any time without notice if new products or techniques become available.)

Australian owned and operated for over 80 Years Site Map | Privacy Statement | Quality Statement
Our Partners
Rhino Lining, Ute Tray MTA Defense Pak Ming Motor One VPS